Monday, 21 September 2020 - Buka jam 09.00 s/d jam 17.00 , Sabtu- Minggu libur
Home » Test and Measurements » Fieldpiece AMN2 Manometer Accessory Head
Keranjang Belanja Anda
Jumlah Barang : pcs
Jumlah Nama Barang Total
0 Rp 0,00
keranjang anda kosong

* Klik tombol di bawah ini untuk menyelesaikan pemesanan.

Fieldpiece AMN2 Manometer Accessory Head

Ditambahkan pada : June 1st, 2016
Rp 1.950.000
Stock : Tersedia
Kode Produk :
Dilihat : 598 kali
Kategori : Test and Measurements
Bingung Cara Order / Pesan?
Customer Service Istana Laser siap melayani dan membantu Anda.

Fieldpiece AMN2 Manometer Accessory Head


  • Works with any Fieldpiece expandable instrument or handle or any DMM with mVDC ranges
  • Measure gas pressure on 3/16″ and 5/16″ regulator ports
  • Enough resolution and sensitivity to measure static pressure
  • ZERO Set on face of instrument
  • Auto Power-Off (APO) for data logging pressure
  • Low battery LED indicator

The Fieldpiece AMN2 is a manometer accessory head for use with our modular multimeters (DMMs) and instruments. The Fieldpiece AMN2 measures gas pressure with enough resolution to measure static pressure. The Fieldpiece AMN2 includes a zero adjust and the Auto Power-Off (APO) function to conserve battery life. Disable APO for data logging. The Fieldpiece AMN2 measures pressure between -60inWC and 60inWC (inches of water column). Take static pressure measurements using the resolution mode of 0.01inWC.

Use the Fieldpiece AMN2 to measure gas pressure or static pressure. Simply connect to COM and Volts jacks on your meter using any Fieldpiece test leads with removable probe tips. For Fieldpiece “stick-style” meters, adapters and handles, slide the head directly onto the unit. Select the mVDC range on your meter. Press the ZERO Set button on the face of the Fieldpiece AMN2. ZERO while the tube is disconnected to calibrate the meter to ambient pressure. Connect the hose to the pressure source to get the gauge pressure relative to the ambient or ZERO pressure.

Field Pressure Calibration
Press and hold the ZERO Set button on the face of the Fieldpiece AMN2. Disconnect the hose from the pressure port to properly calibrate to ambient pressure. To take static pressure measurements quickly across a blower as in the diagram example, press ZERO Set button while the user is connected to the pressure source before the blower then connect to the pressure source after the blower and take the reading.

Resolution Modes (0.1 and 0.01)
There are two modes of resolution on the Fieldpiece AMN2. The 0.1 mode of the Fieldpiece AMN2 is useful for most applications. When measuring low pressures, 0.01 will likely be the best mode for meaningful testing. The most common circumstance for 0.01 mode is measuring static pressure across a blower. Only when using 0.01 mode, the display of your meter will show the true measurement X 10. So if the true measurement is -0.02, your meter will show -0.2.


  • 3/16” tubes with brass fitting
  • 3/16” to 5/16” tube adapter (RMA316)
  • 9V battery (installed)
  • Operator’s manual


  • Pressure Ports:     Tube connector for 3/16 inch (4mm) I.D. flexible tubing
  • Units of Measure:     inches of water column (“WC)
  • Accuracy:     @ 73°F, <90%RH, ±0.4rdg (-20 to 20″WC), applied before dividing reading by 10 on 2″WC range, ±1.0rdg (-60 to -20″WC and +20 to +60″WC)
  • Resolution:     0.1 or 0.01 depending on resolution selected (If 0.01″WC resolution is selected you must divide displayed value by 10 for actual value).
  • Measurement Range:     -60.0″WC to 60.0″WC
  • Operating environment:     32ºF (0°C) to 105ºF (41°C), 15-90%RH
  • Compatible media:     Dry, non-corrosive gases
  • Battery:     Single standard 9-volt battery, NEDA 1604, JIS 006P, IEC 6F22.
  • Battery Life:     150 hours, low battery LED indicator on accessory head
  • Overrange:     “OL” or “-OL” is displayed
  • Auto power off:     15 minutes
  • Dimensions:     ~5 3/16″(131mm) (H) x ~2 7/16″(67mm) (W) x ~1 1/4″(32mm)(D)
  • Weight:     approximately 154g (~1/2 pound) including battery
KONTAK KAMI ( Fast Respond )
*Kami siap melayani Anda dengan sepenuh hati!
Hotline : 085353410506
SMS Center : 089618877628
BBM : 524F3879
Via Yahoo Messenger :

Tulis komentar Anda tentang Fieldpiece AMN2 Manometer Accessory Head

  • Belum ada testimoni
* klik gambar produk