Sunday, 18 August 2019 - Buka jam 09.00 s/d jam 17.00 , Sabtu- Minggu libur
Home » Test and Measurements » Fieldpiece ADMN2 Dual-Port Manometer Accessory Head
Keranjang Belanja Anda
Jumlah Barang : pcs
Jumlah Nama Barang Total
0 Rp 0,00
keranjang anda kosong

* Klik tombol di bawah ini untuk menyelesaikan pemesanan.

Fieldpiece ADMN2 Dual-Port Manometer Accessory Head

Ditambahkan pada : June 1st, 2016
Rp 2.950.000
Stock : Tersedia
Kode Produk :
Dilihat : 446 kali
Kategori : Test and Measurements
Bingung Cara Order / Pesan?
Customer Service Istana Laser siap melayani dan membantu Anda.

Fieldpiece ADMN2 Dual-Port Manometer Accessory Head


  • Works with any Fieldpiece expandable instrument or handle or any DMM with mVDC ranges
  • Measure gas pressure on 3/16″ and 5/16″ regulator ports
  • Enough resolution and sensitivity to measure static pressure
  • ZERO Set on face of instrument
  • Auto Power-Off (APO) for data logging pressure
  • Low battery LED indicator

The Fieldpiece ADMN2 is a portable dual port manometer accessory head for use with our modular multimeters (DMMs) and instruments. Measures gas pressure, static pressure and pressure differential. The Fieldpiece ADMN-2 includes a zero adjust and the Auto Power-Off (APO) function to conserve battery life. The Fieldpiece ADMN2 measures pressure between -60inWC and 60inWC (inches of water column) and -150.0 to 150.0 mBar. The Fieldpiece ADMN-2 also measures P1 or P2 pressure readings and calculates the difference between P1 and P2. Take static pressure measurements using the resolution mode of 0.01inWC or 0.01mBar.

Use the Fieldpiece ADMN/2 to measure gas pressure, static pressure and pressure differential. The User should simply connect to COM and Volts jacks on your meter using any Fieldpiece test leads with removable probe tips. For Fieldpiece “stick-style” meters, adapters and handles, slide the head directly onto the unit. Select the mVDC range on your meter and Remove the rubber strip on the face of the Fieldpiece ADMN2 to access the ZERO button. Press the ZERO button while the tubes are disconnected to calibrate the meter to ambient pressure. Then use the meter as you wish to perform the following tasks:

  • Connect a single hose to get the gauge pressure relative to the ambient or ZERO pressure
  • Connect both hoses if you want to see relative pressure, P1 minus P2. Select P1, P2, or P1 – P2

Field Pressure Calibration
Remove the rubber strip on the face of the Fieldpiece ADMN2 covering the ZERO button. Press the ZERO button to zero both the P1 and P2 to ambient pressure. Disconnect the hoses from P1 and P2 to properly calibrate to ambient pressure.

Resolution Modes (0.1 and 0.01)
There are two modes of resolution on the Fieldpiece ADMN2. The 0.1 mode of the Fieldpiece AMN2 is useful for most applications. When measuring low pressures, 0.01 will likely be the best mode for meaningful testing. The most common circumstance for 0.01 mode is measuring static pressure across a blower. Only when using 0.01 mode, the display of your meter will show the true measurement X 10. So if the true measurement is -0.02, your meter will show -0.2.


  • 3/16″ tubes with brass fitting
  • 3/16″ to 5/16″ tube adapter (RMA316)
  • 9V battery (installed)
  • Operator’s manual


  • Pressure Ports: Two tube connectors for 4mm (3/16 inch) I.D. flexible tubing
  • Units of Measure: inWC and mBar
  • Accuracy: ±1.5% FS 0 to 50°C (32 to 122°F):
  • Resolution: 0.1 or 0.01 depending on resolution selected (If 0.01 resolution is selected you must divide displayed value by 10 for actual value).
  • Measurement Range: inWC: -60.0 to 60.0  mBar: -150.0 to 150.0
  • Operating environment: 32ºF (0°C) to 122ºF (50°C), under 75%RH
  • Compatible media: Dry, non-corrosive gases
  • Battery: Single standard 9-volt battery, NEDA1604, JIS 006P, IEC 6F22.
  • Battery Life: 100 hours with low battery LED indicator on accessory head.
  • Overrange: “OL” or “-OL” is displayed.
  • Auto power off: 15 minutes
  • Dimensions: 131mm(~5 3/16”)(H) x 67mm(~2 7/16”)(W) x 32mm(~1 1/4”)(D)
  • Weight: approximately 154g (~1/2 pound) including battery
Review Date
Author Rating
KONTAK KAMI ( Fast Respond )
*Kami siap melayani Anda dengan sepenuh hati!
Hotline : 085353410506
SMS Center : 089618877628
BBM : 524F3879
Via Yahoo Messenger :

Tulis komentar Anda tentang Fieldpiece ADMN2 Dual-Port Manometer Accessory Head

  • Belum ada testimoni
* klik gambar produk